1.0 Network Infrastructure and Connectivity
IPv6 Addressing Troubleshooting Practice Questions
Updated for CCNA v2.0
Modified EUI-64, prefix sizing, SLAAC prerequisites, and IPv6 address types.
CCNA v2.0 objective 1.4 · objective map
Author-reviewed by LabFabric · 25 September 2026 · Report a content issue
All 9 IPv6 Addressing Troubleshooting questions in this set
Answers and explanations appear when you work through the set above.
Which prefix length must a subnet have for SLAAC to work on an Ethernet LAN?
- /64
- /48
- /126
- /32
IPv6 hosts on a LAN receive no global addresses and no default gateway. The router interface has a global address. Which global command is likely missing?
- ipv6 unicast-routing
- ipv6 enable
- ip routing
- ipv6 dhcp relay destination FF02::1:2
Which command combines the explicitly supplied prefix 2001:db8:1:1::/64 with a modified EUI-64 interface ID derived from the interface MAC address?
- ipv6 address 2001:db8:1:1::/64 eui-64
- ipv6 address autoconfig default
- ipv6 address 2001:db8:1:1::1/64 link-local
- ipv6 enable eui-64
Which IPv6 address type begins with FE80::/10 and is required on every IPv6-enabled interface?
- Link-local
- Global unicast
- Unique local unicast
- Global anycast
Which range are global unicast addresses currently assigned from?
- 2000::/3
- FC00::/7
- FF00::/8
- FE80::/10
An ISP delivers a /48 to a company. How many /64 subnets can the company create from it?
- 65,536 subnets
- 256 subnets
- 4,096 subnets
- 16 subnets
Which command gives a quick summary of IPv6 addresses and interface status on a router?
- show ipv6 interface brief
- show ip interface brief | include up
- show ipv6 route summary
- show interfaces ipv6 status
What does the solicited-node multicast address for the unicast address 2001:db8::1:2345:6789 look like?
- FF02::1:FF45:6789
- FF02::1
- FF02::2
- FF02::1:FF01:2345
A router advertises a prefix with the A flag set, with M=0 and O=1. A DHCPv6-capable host receives the advertisement. What does the host do?
- SLAAC addressing and stateless DHCPv6 settings
- Requests its complete address through a stateful DHCPv6 exchange
- Discards the router advertisement because M=0 disables IPv6 address configuration
- Keeps a link-local address and does not configure the advertised global prefix