1.0 Network Infrastructure and Connectivity
Client Connectivity Troubleshooting Practice Questions
New in CCNA v2.0
Diagnosing wired and wireless client issues from Windows, macOS, and Linux.
CCNA v2.0 objective 1.6 · objective map
Author-reviewed by LabFabric · 25 September 2026 · Report a content issue
All 11 Client Connectivity Troubleshooting questions in this set
Answers and explanations appear when you work through the set above.
Which Windows command shows the IP address, subnet mask, default gateway, DNS servers and whether DHCP is enabled?
- ipconfig /all
- ipconfig /flushdns
- netstat -an
- arp -d
Which Linux command shows the IP addresses assigned to interfaces on a modern distribution?
- ip addr
- ipconfig /all
- show ip interface brief
- netsh interface show
Which macOS Terminal command displays interface addresses and status?
- ifconfig
- ipconfig /all
- ip addr
- show interfaces
A PC with the address 192.168.10.25/24 can ping other hosts on its subnet but not hosts on other networks, and its default gateway is set to 192.168.20.1. What is wrong?
- The gateway is outside the PC's /24 subnet
- The /24 mask is too long for a host ending in .25 and must be changed to /16
- DNS is not configured
- The PC needs an IPv6 address
A laptop can ping 8.8.8.8 but cannot open websites by name. Which check comes first?
- The client DNS settings
- The spanning tree root bridge
- The trunk allowed VLAN list
- The router's OSPF process ID
A laptop repeatedly fails to join a WPA3-Personal SSID even though the passphrase is correct, but a phone joins the same SSID. What is the most likely cause on the laptop?
- The adapter or driver lacks WPA3 support
- The default gateway is outside the DHCP subnet assigned to the laptop
- The switch port has PortFast enabled
- The DHCP scope is too small
A wireless client is associated to an access point and shows a valid IP address, but cannot reach any network resources. Which detail would be most useful to check?
- Signal strength, SNR, gateway and DNS settings
- The CPU utilisation of the core router
- The STP priority of VLAN 1
- The NTP stratum configured on the syslog server
Which Windows command releases the current DHCP lease so a new one can be requested?
- ipconfig /release followed by ipconfig /renew
- ipconfig /displaydns then ipconfig /flushdns
- netsh wlan disconnect only
- route delete 0.0.0.0
Which Linux command shows the default gateway that the host uses?
- ip route
- ip link set up
- arp -f
- hostname -I
A new Windows laptop cannot join the WPA2-Enterprise SSID. Other laptops join it, the user's credentials work on the web portal, and the RADIUS log shows the laptop ending the exchange before sending credentials. What is the most likely cause?
- The laptop distrusts the RADIUS server certificate
- The access point's channel is too crowded for another client
- The laptop's DHCP lease has expired and must be renewed
- The SSID is hidden, so the laptop cannot see its beacons
On a Windows laptop, which command shows the SSID the adapter is connected to along with its authentication type and cipher, such as WPA2-Personal and CCMP?
- ipconfig /all | findstr SSID
- netsh wlan show interfaces
- route print -4
- arp -a