Skip to content

CCNP Enterprise · 350-401 ENCOR · Learning path

ENCOR, one stage
at a time.

Start with the hands-on infrastructure that carries 30% of the exam, then build up to virtualisation, assurance, security, architecture and automation. Every stage has practice questions, and the hands-on stages add labs.

What the exam weighs

15%

1.0 Architecture

10%

2.0 Virtualization

30%

3.0 Infrastructure

10%

4.0 Network Assurance

20%

5.0 Security

15%

6.0 Automation and Artificial Intelligence

9 stages, in order

Try each lab with guidance, then repeat it in expert mode. A stage is done when you can pass its topic questions and name the evidence that proves each fix without the answer open.

  1. Exam objectives 3.1

    Harden Layer 2

    Read RSTP and MST roles, protect the root, and bundle links that stay bundled.

    Before you begin: CCNA-level VLANs, trunks and spanning tree.

  2. Exam objectives 3.2

    Tune the IGP

    Explain LSA types, area types and network types, compare EIGRP metrics, and summarise without losing reachability.

    Before you begin: Single-area OSPF adjacencies and a routing table you can read.

  3. Exam objectives 3.2

    Control the BGP path

    Bring up eBGP neighbours and predict the best path from its attributes.

    Before you begin: IGP routing and administrative distance.

  4. Exam objectives 3.3, 4.4

    Keep the gateway and services up

    Make first-hop redundancy react to real failures, and verify NAT, NTP and multicast services.

    Before you begin: A working routed network.

    Live lab in preparation · IP SLA tracking and EEM

  5. Exam objectives 2.1 to 2.3

    Virtualise the data path

    Separate tables with VRFs, carry traffic in GRE and IPsec tunnels, and explain LISP, VXLAN and hypervisors.

    Before you begin: Routing tables and how a packet is encapsulated.

    No lab in this stage yet. Practise with the topic questions, then pass each level on the ENCOR objective page.

    Live lab in preparation · VRF over an IPsec-protected GRE tunnel

  6. Exam objectives 4.1 to 4.5

    Observe the network

    Collect evidence with syslog, SNMP, NetFlow and SPAN, and read assurance health data.

    Before you begin: Know what normal looks like on the devices you manage.

    Live lab in preparation · Flexible NetFlow

  7. Exam objectives 5.1 to 5.4

    Secure access and infrastructure

    Lock down management access, place Layer 2 protections, and explain AAA, 802.1X, TrustSec and firewall design.

    Before you begin: ACLs, SSH and the access layer.

    Live lab in preparation · Control Plane Policing

  8. Exam objectives 1.1 to 1.4, 3.3

    Explain the architecture

    Compare campus designs, SD-WAN and SD-Access, and interpret QoS policy.

    Before you begin: The hands-on stages, so the designs have something to stand on.

    No lab in this stage yet. Practise with the topic questions, then pass each level on the ENCOR objective page.

  9. Exam objectives 4.6, 6.1 to 6.7

    Automate the change

    Read Python and JSON, use NETCONF and RESTCONF, interpret API responses, and write an EEM applet.

    Before you begin: Make and verify the same change by hand first.

    No lab in this stage yet. Practise with the topic questions, then pass each level on the ENCOR objective page.

Before or after the path

ENCOR Readiness Assessment

Sixty challenging questions weighted like the exam and six terminal tasks, in 120 minutes, the same time as the real exam, with no going back. You get a score per domain and the stage to start from.

Start the assessment

Questions about the ENCOR path

Do I need the CCNA first?

Cisco sets no formal prerequisite, but this path assumes CCNA-level switching and routing. Several labs here are CCNA labs used as a refresher before the ENCOR depth questions. If they feel hard, work through the CCNA path first.

Which labs are live?

Labs marked Live lab start real routers for your session and need an Exam or Year pass. The others are browser simulations that model the commands their fault needs.

Why do some stages have no lab?

Architecture, virtualisation and automation are mostly explain-and-interpret objectives on the exam. Those stages use the practice questions and the objective levels, and labs are added as they ship.

How do I know I am ready?

Take the readiness assessment and aim for 80% in every domain. Then work up through the levels of each objective on the ENCOR objective page (some objectives have fewer than three, because small question pools are merged), and finish each lab in expert mode without revealing the answer.

Independently authored practice, mapped to the Cisco 350-401 ENCOR v1.2 exam topics. CCNP Enterprise overview · CCNA path · See current pricing